As I started working with the sensory tables, I found them quite boring. That was especially true of the sand table. The setup was very basic: sand, shovels, scoops and pails. The children quickly tired of the setup and so did I. One of the first things I did to make the sensory table a little more interesting was to add an element or two to foster a little more play and exploration. One of the early additions was a cardboard box taped inside the table with an attached plastic chute.
This is a digital picture of a photo from over 25 years ago. I was already taking pictures back then, but because I was using rolls of film and because I was new at documenting, my pictures are not so plentiful and not so informative.
I said the table was small. It was a metal table that stood 10 inches off the ground and was a square that measured 2' x 2'. I did have a mat underneath that expanded the total sensory area to 4' x 4'. Needless to say, even the expansion did not create a big area.
One of the important elements of this setup is the five-gallon pail next to the table. If you look at the axioms in the right-hand column of this blog, the very first axiom states that children need to transport the sand out the table. The pail gives them the option to do it constructively. And, as many of you know from firsthand experience, without the bucket, the sand gets dumped on the floor.
My documentation on this apparatus is sparse. I usually like to go into some depth about how the children explored an apparatus. I cannot do that with this apparatus. All I can do is speculate.
I am struck by the simplicity of this setup: a cardboard box with a
plastic chute inside the table. Though it was a simple setup, it
created several spaces within the table that were intriguing invitations for
the children's operations.
In the picture below, there are four main spaces in which the children can operate. There is the pail and the the box. Both of these spaces can be considered spaces to fill and empty. There is the chute which allows the children to set the sand in motion. In addition, the chute creates a space underneath. If the children want to get sand by scooping underneath the chute, they have to figure out how to do that without bumping into the chute and without spilling. And there is the sand table itself. Interestingly, the cardboard box divides the sand table into different areas: there are areas on each side of the cardboard box and one in front of the box. The box is both a barrier and guide for the children to operate in that space. For instance, if a child wants to scoop sand with the white measuring cup, she has to move the cup laterally as defined by the edge of the cardboard box and the edge of the sand table.
When I started building apparatus, I had a birth-to-five classroom. In the pictures I have of this apparatus, there are three children of different ages (4, 3, and 1) all playing at the table at the same time. Not bad for a simple apparatus.
I started transforming my sensory table by building simple apparatus. If you are tempted to build, I would urge you to start with simple constructions, too. Though the structure might be simple, the children create their own complexity through play and exploration. Just imagine what the play would be like for these children in this tiny table without the box and chute.